BECKHOFF EK1110 -0044 EtherCAT-EJ coupler, CX and EL terminal connection, EtherCAT branch

The EK1110-0044 connects CX series Embedded PCs and EL series EtherCAT Terminals with EJ series EtherCAT plug-in modules on an application-specific signal distribution board. It is ideal for machine and series production applications requiring compact, pre-assembled control solutions. Also suitable for creating an EtherCAT branch or extending with EJ modules.

You can become a member here to see prices and take advantage of other privileges.

Adet

Request an offer

Ask a question

The EK1110-0044 forwards EtherCAT telegrams as E-bus signals to EJ modules. It features a rear plug connector and a front RJ45 socket, enabling direct coupling of Embedded PCs and EtherCAT Terminals with EJ modules without additional EK1110 or EJ1100 couplers. System and field supply are provided by the Embedded PC power supply. The RJ45 socket allows connection to another EtherCAT segment or device

Task: Forward E-bus signals to EJ signal distribution board

Data Transfer Medium:

X1: Ethernet/EtherCAT cable (min. Cat.5, shielded)
X2: PCB tracks

Distance: 100 m (100BASE-TX)

Data Rate: 100 Mbit/s

Delay: Approx. 1 µs

Interfaces:

X1: 1 x RJ45
X2: Rear plug connector

Protocol: EtherCAT

Power Supply: From E-bus, Embedded PC power supply

Current Consumption: Typ. 140 mA

Electrical Isolation: 500 V (supply/Ethernet)

Dimensions: Approx. 44 mm x 100 mm x 68 mm

Weight: ~50 g

Operating Temperature: -25 °C … +60 °C

Storage Temperature: -40 °C … +85 °C

Humidity: 95%, no condensation

Protection Class: IP20

Mounting: 35 mm DIN rail (EN 60715)

Approvals: CE, EAC, UKCA

Data Sheet