WENGLOR OY1P303P0102 distance sensor

You can become a member here to see prices and take advantage of other privileges.

Adet

Request an offer

Ask a question

The Wenglor OY1P303P0102 is a laser time-of-flight distance sensor featuring red laser (660 nm) and WinTec interference-free technology. It accurately measures distances from matte to glossy, including black surfaces, over 50–3050 mm. With a graphical display for easy configuration, two independent switching outputs plus analog output (0–10 V / 4–20 mA), it’s ideal for automation, fill-level detection, stacking systems, and fast quality inspection.

Optical Data

Working range: 50–3050 mm
Measuring range: 3000 mm
Reproducibility: ≤ 1 mm
Linearity: 7 mm (200–3050 mm), 15 mm (50–200 mm)
Switching hysteresis: 3–20 mm
Light source: Red laser, 660 nm, Class 1
Service life: 100,000 h
Max ambient light: 10,000 lux
Beam divergence: < 2 mrad

Electrical Data

Supply voltage: 18–30 V DC
Current consumption: < 70 mA at 24 V
Switching frequency: 250 Hz
Measurement rate: 1–500 measurements/s
On/off delay: 0–10,000 ms
Temperature drift: < 0.4 mm/K
Operating temperature: –40…+50 °C

Outputs

Two independent switching outputs (PNP/NPN/push–pull), each up to 100 mA, voltage drop < 2.5 V
Analog output: 0–10 V or 4–20 mA
Protections: short‑circuit, reverse polarity, overload

Mechanical & Interface

Configuration: Menu-based Teach-In via X2 control panel
Housing: Plastic with PMMA optics
Protection class: IP68
Connection: M12×1, 4-pin
Interface: IO‑Link 1.1
Features: error/contamination output, configurable analog output
Safety: MTTFd 349.73 years

Data Sheet